Anycubic Mega S - guide for 220x220 build plate install
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps install a 220x220 build plate on the Mega S' 240x220 build area.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 105
- Makes
- 0
- Views
- 1,583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Public Domain
These are for helping align a smaller 220x220 build plate for a Anycubic Mega S. The default build plate is 240x220 (build area is 210x210 due to clips). I wanted to change the default glass for a PEI sheet, but it's very difficult to source one in that odd size. The few I found were 2-3x the cost. Instead I got a 220x220 one and used these to help align the magnetic sticker.
Original 3D model in Onshape. It has variables so it should be fairly easy to customize.
I couldn't find details from others who made this upgrade, so here's what I learned:
- Overall, I really love the PEI sheet!
- I washed it with soap to get prints to stick. I don't use glue.
- The 220x220 does show the frame a bit below in spite enlarging the printable area. I knew this in advance. That said, I will probably try a 235x235 PEI sheet in the future.
- I did not have to adjust home or anything; changing the size within Prusa Slicer prints on the entirety of the sheet as expected.