Auto Incrementing Finetuning First Layer Calibration
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.06 – €0.08 net (excluding VAT)
For file: AutoZ_PETG-0.01mm_Increments_MK3S_PETG_0.4.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modified the steps between each auto-live-z adjustment. Now in increments of 0.01mm and 0.005mm to fine tune your live-z
- Rating
- 4.333 / 5
- Likes
- 32
- Downloads
- 226
- Makes
- 2
- Views
- 1,816
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Start by following the steps/using the original gcode from jkoether: https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration. Once you have chosen the best live-z setting using his original gcode, then use the 0.01mm increment file in my remix. This will help you further pinpoint the right live-z height.
If you really want to fine-tune further, you can use the 0.005mm increment remix. Any time I get a new steel sheet or do a nozzle swap I use jkoether's model and my two remixes to get a very precise live-z quickly.