DJI Mavic Air 2 sunshade
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.74 – €0.91 net (excluding VAT)
For file: RightScreen_0.2mm_PLA_MK3S_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.83 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 39 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mavic Air 2 sunshade in two versions (Samsung galaxy S9+ and the S21 Ultra) but should work for most phones.
- Rating
- 4.889 / 5
- Likes
- 152
- Downloads
- 861
- Makes
- 15
- Views
- 4,030
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Another Mavic Air 2 sunshade
- V1: fit for Samsung galaxy S9, but should work for most. Your phone must be at least 55 mm width and do not exceed 160mm length.
- V2: fit for Samsung galaxy S21 ultra, but should work for most. Your phone must be at least 55 mm width and do not exceed 170mm length.
The V2 has also a thinner frame for photo modules bumps
Print instructions
- no glue
- no support
Use dark filament or sun may pass trough