1 / 2
OrangePi Lite stand for RPi mounting holes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows mounting OrangePi Lite (42 x 63 mm) onto regular full-size RPi (49 x 58 mm) mounting holes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand holes spacing: 42 x 63 mm
Baseplate holes spacing: 49 x 58 mm
Screws size: M3x[5-12] for the board stands, M3 of the applicable length and M3 nuts for the baseplate.
Filament: any common filament will do. PETG stands can be threaded directly with an M3 screw. A thread tap is recommended for pre-threading the stands printed in PLA or ABS