remixed Filament Dry Box using Inomata-K Dry Food Stocker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed version of Kazmar's Filament Dry Box using Inomata-K Dry Food Stocker
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 236
- Makes
- 2
- Views
- 3,723
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original MK2 by Kazmar was released. The build processes are significantly improved. Please check it now!
https://www.printables.com/model/585925-filament-drybox-inomata-k-mk2
- September 20, 2023 -
Dear Japanese users.
ご訪問いただきありがとうございます。
原作者Kazmarさんによる新作MK2が登場しています。当modにて提案した2つの問題に対する解決策は、新作MK2へ一部取り込まれると共にさらにより良い手法によって解決されました。また、製作の難易度を下げる当modの3つの小改善点は、新作MK2ではさらに画期的な新アイデアが盛り込まれ改善されています。大変おすすめできます。
ぜひ当modに代わってKazmarさんの新作MK2をご検討いたきたくお願いいたします。次のURLからアクセスできます。
https://www.printables.com/model/585925-filament-drybox-inomata-k-mk2
※ 当modにつきましてはインターネット上におけるモデル改善履歴の一つとしての歴史的価値、および、何らかの理由で当modのURLへたどり着いた方をより良い新作MK2へご案内できるようリンク切れを防ぐため残させていただく所存です
Summary
I really like the Filament Dry Box by Kazmar for its usability and clean design, as well as the remixed version by EHSIEI for its easier build process. I fixed two issues I found and added three minor improvements on top of EHSIEI's remix. Happy to share the results.
BOM
Printed parts
Part | pcs | Model |
Side | 2 | FDB_Mod_Side.stl |
Roller | 2 | FDB_Mod_Roller.stl |
Bottom | 2 | FDB_Mod_Bottom.stl |
Connector | 2 | FDB_Mod_Connector.stl |
Shaft | 2 | FDB_Mod_Shaft.stl |
Meter holder | 1 | The original FDB_Hygrometer_holder.stl |
PC4 mounter | 1 set | PC4 drybox feeder with knurled screw-on cap (M10&M6) |
Non-printing parts
Part | pcs |
Inomata Chemical Dry Food Stocker 6.0 (Inomata-K) (color: Natural / Black) | 1 |
Ball bearing 608ZZ or 608-2RS | 4 |
M5x20mm Bolt | 4 |
M5 Nut | 4 |
1 | |
PC4 quick connector M10 or M6 | 1 |
Fixed issues
1. The spool gets stuck in the ditch
The spool often gets stuck in the gap between the roller and the side panel when the flange of the spool is thin. I added side ribs to both rollers to prevent this.
Issue: Gets stuck by dropping out | Fixed: Side ribs are added |
![]() | ![]() |
![]() | ![]() |
2. The bottom fitting is easy to break
The bottom fitting can break under stress. I added thickness for added strength.
Issue: Sometimes easy to break fittings | Fixed: Thickness is added |
![]() | ![]() |
![]() | ![]() |
Minor improvements
3. Side Panel
Modified to use two short M5 bolts instead of a single long M5×70 bolt and nut. Essentially the same as EHSIEI's approach, but uses the mid-air hole technique for easier printing.
The original: Nut hole with Mid-Air tech | This remix: Bolt hole with Mid-Air tech |
![]() | ![]() |
4. Connector
The M5×20 version of the connector, based on EHSIEI's M5×30 design.
The EHSIEI's version: for M5x30 | This remix: for M5x20 |
![]() | ![]() |
5. Roller Shaft
Based on EHSIEI's "beam" but with two differences: the cross-section is oval (D=7.6mm) for easy insertion into the 8mm ID bearings, and the length is 76mm (vs. EHSIEI's 75mm) so the side panels hold the shaft more securely.
The EHSIEI's version | This Remix: Oval shape based |
![]() | ![]() |













