1 / 4
Arducam B0200 printer mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arducam B0200 camera mount for MK2/MK3/S/+.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This model is inspired by Michal Fanta and arm is based on Original Prusa I3 z-axis-top model.
It is possible to use with Raspberry Pi Camera and with Arducam and other USB cameras where is possible disconnect and connect the USB cable to the camera again.
The 3mf file, which contains the prepared model, is ready for the PruSlicer.
I sliced and printed the camera top part without full infill. So there is mesh for ventilation.
Required not printed parts:
- 2x screw M3x6 - for mount camera to bottom part
- 1x screw M3x20 to M3x55 - for mount camera box to arm
- 3x screw M3x12 - for mount camera top
- a few of thin cable ties - for mount USB cable to arm, printer frame and cable management