1 / 1
Uplift V2 Standing Desk Hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uplift V2 standing desk logo plate hook
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 126
- Makes
- 5
- Views
- 996
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The Uplift V2 standing desk has a logo plate on either side. If you remove the name plate there are two M6x10mm pan head screws. Attach this hook where the name plate was using longer M6x20mm pan head screws. I routinely hang my work/laptop pack on this hook (~20 lbs).
Additional Hardware
- 2 M6x20mm pan head screws (per side/print)
Printing Suggestions
- Print as laid out, horizontally instead of vertically, force is then perpendicular to layers
- Use bed supports for overhang
- Print at 40%+ infill
- Use 2mm minimum horizontal and vertical shell thickness