Daemonbite MegaDrive/Genesis Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Case for the Daemonbite Retro Controller USB Project by MickGyver (https://github.com/MickGyver/DaemonBite-Retro-Controllers-USB).
The aim of this design is being able to create a plug&play adapter (compatible with MiSTer FPGA, Raspberry Pi, PC, etc.) without sacrificing an original controller. You will need the following materials:
- Arduino Pro Micro (https://es.aliexpress.com/item/32833555748.html?spm=2114.13010708.0.0.75c563c0k9xTro)
- DB9 Female conector (https://es.aliexpress.com/item/32836083939.html?spm=2114.13010708.0.0.7f5363c0SF8oTz)
Pieces are designed to tight fit, but gluing them is recommended.
.STEP files are provided for any further modification.
----------------------------------------------------------------------------
Carcasa para el proyecto 'Daemonbite Retro Controller USB' por MickGyver (https://github.com/MickGyver/DaemonBite-Retro-Controllers-USB).
El objetivo del diseño es construir un adaptador plug&play (compatible con MiSTer FPGA, Raspberry Pi, PC, etc.) sin necesidad de sacrificar un mando original. Se requieren los siguientes materiales:
- Arduino Pro Micro (https://es.aliexpress.com/item/32833555748.html?spm=2114.13010708.0.0.75c563c0k9xTro)
- Conector DB9 hembra (https://es.aliexpress.com/item/32836083939.html?spm=2114.13010708.0.0.7f5363c0SF8oTz)
Las piezas se han diseñado para encajar entre sí, pero se recomienda unirlas con pegamento.
Se proporcionan los ficheros .STEP para realizar cualquier modificación.
Print Settings
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Glitter Grey
Category: 3D Printing