1 / 3
Esee Izula Textured Scales
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Longer textured scales for the Esee Izula which extend to the back end of the knife.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 238
- Makes
- 1
- Views
- 1,217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Longer textured scales for the Esee Izula which extend to the back end of the knife.
I printed these with .08 layer height for a little less aggressive texture. I'd recommend at least 3 walls, tops, bottoms, if not a few more. 20% or more cubic infill. No supports required.
The hardware used is M5 x 16mm. The nut would use an 8mm wrench and is 4mm tall.
Edit: Added the three parts without holes for anyone wanting to cut holes for their own hardware.