Privacy cover for the Logitech C610 and C525 Webcams
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.43 – €1.75 net (excluding VAT)
For file: camera_cover_01mm_pla_mk3smmu2s_2h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.59 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 2.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! Also made one for the C525.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 169
- Makes
- 2
- Views
- 790
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! The thin ring front means you can see the LEDs on the camera when they're on whether the cover is opened or closed.
This uses a print-in-place hinge. The swinging cover was designed to fold completely flat when open and it does so nicely.
I printed mine in Prusament Galaxy Black and it looks fantastic and the supports just popped off cleanly.
Print instructions
This prints on its side. You'll need supports. If you use Galaxy Black, they come off really cleanly. I used 0.10 but 0.10 or 0.20 should be fine (the vertical gaps for the print-in-place hinge are 0.20mm apart).
In the 3DF file (provided), the settings were to print 7 perimeter walls, but I doubt it found the space for that many as most of this is only 2 mm thick. I just didn't want any infill. I also used a small, cylindrical support blocker in the hinge area to avoid any supports there.
Once printed, remove the supports and gently break the hinge free, and you're good to go!