Tamiya DT-03 caster blocks - front wheel hex mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are caster blocks for the Tamiya DT-03 hex wheel mod
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 61
- Makes
- 0
- Views
- 652
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
These are caster blocks for the Tamiya DT-03 hex wheel mod. They are based on the Traxxas TRX3632 caster blocks but modified to fit the different geometry of the front suspension of the DT-03.
To do the whole mod, you do need to purchase the following Traxxas spare parts:
TRX3736
TRX3637
TRX3654 (can be printed if you have some spare pins)
In addition you also require to purchase the Tamiya Full Turnbuckle Set TA-54572. The steering link won't fit anymore. An easy solution is to use some M3 rods.
German instructions (without the printed parts) aka source I used for the mod: https://www.rc-modellbau-portal.de/index.php?threads/tamiya-dt-03-neo-fighter-umbau-auf-sechskant-mitnehmer-vorn.1009/
I haven't tested the caster blocks yet. They do fit and seem to move freely but I don't know if they are as tough as the original Traxxas parts. Therefore I do recommend to use some tough material like nylon or polycarbonate. But maybe PLA or PETG will do just fine.
For easy modification of the models I attached the STEP files.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100
Filament: Prusament PC Blend
Category: R/C Vehicles