Tamiya Neo Fighter DT-03 front suspension mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare front suspension mount for the Tamiya DT-03.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 229
- Makes
- 2
- Views
- 920
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Spare front suspension mount for the Tamiya DT-03 when no genuine spare part is available.
It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2 - 0.3
Infill:
60% - 100%
Notes:
I used PETG for my print but other filaments should work just fine, too. For a more rigid part use a low (0.3) resolution. Infill is your choice. I used 80% and 6 perimeters (0.4 nozzle).
The "easy_bridging_FSM.stl" has closed countersunk holes for better bridging results. So you don't need supports. Just use a drill or sharp knife to clear the holes after printing.
Category: R/C Vehicles