Sliding Tray For IKEA ALEX Drawer Units
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this tray for some of the tools I use regularly. Option 1: If you have a printer that is capable of printing…
- Rating
- 4.5 / 5
- Likes
- 216
- Downloads
- 394
- Makes
- 2
- Views
- 4,740
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I made this tray for some of the tools I use regularly.
Option 1: If you have a printer that is capable of printing parts that are 320 mm wide you only have to print the Complete.stl
You will also need 4 Self-adhesive felt pads, about 3 mm thick
It needs to be printed with supports. Please bear in mind that I couldn't test print that thing so I'm not absolutely sure if it will work properly. A "Make" would be nice
Option 2: If you don't have suche a big printer, you can print all the other files and will need some additional parts:
1 piece of plywood 288 x 140 x 6 mm
4 Screws M3 x 10 mm
4 Nuts M3
4 Self-adhesive felt pads, about 3 mm thick
The bit holders fit 6,3 mm and 4 mm bits.
Slider.stl, Rail.01.stl and Rail.02.stl are needed to be printed 2 times
Category: Organization