1 / 1
Creality Sermoon-D1 Z-Axis Floating Synchronizing Idler Pulley
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Idler pulley to synchronize the two Z stepper motors and prevent missteps between them.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 86
- Makes
- 0
- Views
- 1,042
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Synchronizer Pulley
Print with at least 2 mm walls, top/bottom layers and at least 40 % infill. This part needs to be strong. in addition you will need the following:
- Two GT2 36 teeth pulleys with 5 mm bores.
- One closed-loop GT2-852 mm timing belt (6 mm width.)
If the belt is too tight/loose you can scale the x, y dimensions in your slicer (tight - smaller; loose - larger.) Use small increments ( < 1 % at a time.)
The belt needs to stretch a bit (~ 2 mm) when fitting the pulley.
You will lose 10-15 mm of your build height because of this modification.