Free-standing everything holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a remote holder which stands by itself on 4 legs. You can use it for other things as well
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
This is an all purpose holder designed for remote controls but can be used as other things including a pencil pot of desk organizer.
I printed on a Flsun V400 and made some slicer errors so the back wall didn't print perfectly. The left compartment is slightly smaller than the right. I printed it in a Amazon basics Gold silk PLA, but could be printed in anything you like.
I used a 0.2mm layer height and 20% infill and most importantly USE SUPPORTS because I did not and the back wall printed really badly.
Also rotate by 90 degrees on the X-axis so the pattern side is on the build plate.
This is my 4th version as all earlier versions had printing problems.
Below I have sliced it for a mk3s+ so there is filament usage and time.