TFT70 V3.0 Case and Adapters.

Modular screen case for the Bigtreetech TFT70 V3.0.

You will need 4 x M3 x 5mm bolts to attach the screen to the printed case.

the bolt holes may need to be cleared with a 2.5mm drill bit and the threads started with a M3 tap to ease installation of the bolts. be careful not to drill through the face of the case.

4 x 8mm diameter rubber bumps for the base of stand if required. (To stop it sliding on smooth surfaces.)

The two parts clip together via hidden locating pins.

The reset guard will need a dab of superglue to hold it in place.

I will be adding another option for integrating it to a Sk Go2 frame.

The front case will stay the same as I can use the same locating points for any subsequent rear adaptor.

I have run into issues before with TFT screens where the encoder and reset button are free spirits and are not always in exactly the same spot screen to screen. The uploaded model is an exact fit for my screen, If you would like to give me feedback with accurate size offsets I am happy to adjust the size of the openings to accommodate slight variances in the screens. I can increase the tolerance on the openings and model a universal reset guard to suit.

Chris from Chris's Basement has done a remix to let the led light through for the nob. https://www.thingiverse.com/thing:4587549

Print Settings

Printer Brand:

Creality

Printer:

Supports:

Yes

Resolution:

Infill:

10%

Filament:

eSUN PLA+, PETG

Any

Notes:

Category: 3D Printing