1 / 4
Fan Housing for Ender 3 Pro with integrated CR Touch support — image 1
1 / 4

Fan Housing for Ender 3 Pro with integrated CR Touch support

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A lightweight yet strong fan housing with support for CR Touch.

Rating
0 / 5
Likes
4
Downloads
53
Makes
0
Views
462
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I've spent hours searching for a fan housing witch can accommodate 10 or 20mm fans, with a simple and lightweight design and also integrates the CR Touch support. As I couldn't find something to fit my needs I decided to go for my own design.

I had to print it a few times and do some tweaking until it came out the way I wanted, but in the end it turned out great.

The fans can be replaced quickly, without disassembling anything other than the 4 screws that support it.

For this fan housing the stock fans can be used as well as any other 40x40mmx10 or 20mm fan for the hot end, including the famous Noctua fan.

I tried to make it as minimalistic as possible but without compromising his strength.

The fan blows to the heatsink only, maximizing his efficiency.

The CR Touch support is placed as close as possible to the nozzle so for those who use the Marlin firmware, in the Configuration.h the values for the NOZZLE_TO_PROBE_OFFSET should be:

#define NOZZLE_TO_PROBE_OFFSET { -37, -7, 0 }

A new fan duct is needed for the part cooling so I attached also a modified version of this one: https://www.thingiverse.com/thing:2814127

 

I've attached an image with the recommended printing position which I think is best also for aesthetics of the piece as well as for removal of supports.

Tags