1 / 5
IKEA Trådfri switch holder for Skådis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for the IKEA Trådfri switch. It uses a T-nut to be mounted on a IKEA Skadis board.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 38
- Makes
- 2
- Views
- 638
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This Trådfri switch holder for Skådis that uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178. The switch is attached to the holder by a 6mm magnet, so that the metal base plate isn't needed.
Details to be mentioned
- The holders is mounted to the Skådis board with one T-nut (using a M2.5x12 screw).
- The magnet (6x2mm) press fits into the holder
- The magnet can be removed with a small screw driver
- When printed
- The holder should be printed with the backside to the print bed
- Activate support for the cavity that holds the alignment guide
- The alignment guide can be glued into the cavity if you like