1 / 1
Voron2.4 DIN-Rail Mounting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative Mounting solution for the DIN-Rails in your Voron 2.4* to avoid putting holes into the deck panel
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 149
- Makes
- 0
- Views
- 965
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
You can use this model either as a stand alone mounting solution for your DIN-Rails or as an ad-on for more stability.
What you need:
- 4x M3 T-nuts
- 4x M3x12 Hex Screw
Keep in mind:
Your deck panel must not exeed a thickness of 3mm and your DIN Rails must be as long as the frame width minus 41mm.
L_din-rail = Frame_width - 41mm
Disclamer
The Mounting is designed with tight tolerances, so some force(d) fitting might be required.
If you decide to not screw the DIN-Rails onto the frame directly you need to ground them in an other way.