CatchAll for bedside
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.92 – €12.13 net (excluding VAT)
For file: One Piece Quick With No Supports. / bedroom-catchall_03mm_pla_mini_6h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.02 excluding VAT (range midpoint).
- Weight reported by the author
- 234 g
- Print time reported by the author
- 6.42 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed to be printed in two pieces not requiring support with interference fit not requiring glue
- Rating
- 5 / 5
- Likes
- 97
- Downloads
- 228
- Makes
- 5
- Views
- 1,320
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Printed in two sections not requiring support, with interference fit that also negates glue.
I printed the example at 0.28 layer height with two walls and 20% infill. I think it would be better at 0.20 layer height with four walls.
Later I added a new file that includes the entire model, based on user feedback.
Still later I added a version that has a taller Body2, based on user feedback. Modified the connection tabs further; they were 5mm too tall. Changed in v8. Also, I think there is no interference fit on the tabs on the taller version; they will provide alignment but probably will need some glue.