Raised Bed Sprinkler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and small sprinkler i made for my raised bed.
- Rating
- 4.667 / 5
- Likes
- 124
- Downloads
- 500
- Makes
- 3
- Views
- 4,394
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple and small sprinkler i made for my raised bed.
Video: https://youtu.be/ph-5ruPQspw
The diameter of the hose connecter is 7mm. So a hose with 6mm inner diameter should work fine. I used an ordinary pond pump and it doesn't require a lot of pressure to work.
The pole should print fine without supports, as the required bridging is quite short.
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.