Showerhead holder / 샤워헤드 걸이
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.30 – €1.59 net (excluding VAT)
For file: ShowerHolder_0.25mm_PLA_MK3S_1h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.44 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.4 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the part that can hold the shower head. / 샤워헤드를 걸 수 있는 부품입니다.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 69
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
It is a part for the shower head.
My bathroom didn't have a showerhead holder in a location I liked, so I made one.
Supports are not required, but it is recommended to set the outer wall to 3 for rigidity.
When printing is complete, it can be fixed in the desired location using silicone or double-sided tape.
샤워헤드를 위한 부품입니다.
내 욕실에는 맘에 드는 위치에 샤워헤드 홀더가 없기 때문에 하나 제작하였습니다.
서포트는 필요하지 않지만, 견고함을 위해서 외벽을 3으로 설정하길 추천합니다.
출력이 완료되면, 실리콘이나 양면 테이프 등을 이용해 원하는 위치에 고정 할 수 있습니다.