Bottle holder for Dacia Dokker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert for the center console, so that bottles can no longer tip out to the rear.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 121
- Makes
- 1
- Views
- 1,002
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The mounting screw in the original bottle holder is unscrewed.
The insert 1 is inserted into the center console. Make sure that the recess on the inside of the base points in the direction of travel (the insert is not symmetrical). Insert part 2 into the hole on the bottom and screw it tight. The hole can be closed with the conical plug 3 (simply press it in). The plug has a small hole at the top, where you can screw in a screw. This allows the plug to be removed again if the whole thing is to be dismantled again.
Print with PLA, 0,3 mm layer height