1 / 3
Minimal two-color extruder indicator, magnetic, no glue — image 1
1 / 3

Minimal two-color extruder indicator, magnetic, no glue

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

There are many extruder movement indicators, and I was looking for something simple, so here is my own take.

Rating
4.75 / 5
Likes
129
Downloads
460
Makes
10
Views
3,011
Reviews
8

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

There are many extruder movement indicators, and I was looking for something simple, so here is my own take.

This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement the MK3S color scheme).

This requires three small (6 or 8mm) magnets (I used 6mm round x 2mm thick) to attach it to the shaft:

  • one of the magnets simply goes onto the extruder shaft;
  • the other two magnets go on either side of the movement indicator "cup" and sandwich it in place
  • finally, the bottom magnet is attached to the extruder-shaft magnet

No glue required, it's reversible, reusable!

Openscad file include for your tinkering pleasure. This was done on MacOS. You can easily add your own in the table at the beginning. It uses unicode from the wingdings font (but can of course be anything else), and the parameters in the table are for rotation, font size, y offset, and x-offset.

Print instructions

PETG, 2 colors, 0.15mm layer height, no support, printed face down on textured bed.

Tags