1 / 2
Two-Way Molle Tag - Wolf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-way MOLLE tag with a Wolf cutout.
- Rating
- 4.333 / 5
- Likes
- 104
- Downloads
- 287
- Makes
- 3
- Views
- 1,331
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I loved the 2-way MOLLE model I found here and I personalized it. In my file is the MOLLE tag and a filler for the cutout. I printed a set in black and a set in GITD green and swapped inserts. If your printer tolerances are good, the inserts will press fit in, with no need for glue or anything.
NOTE: The insert should be pressed in flat with the “back” of the tag. The insert is slightly shallower in depth in the front of the tag for asthetics. Gives a little impression of embossing.
Printed in 0.2 layers, 0.4 nozzle, no supports, 10% infill.