1 / 4
Drying Rack Standoff
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A standoff for the metal bars of our drying rack. Used to prevent our vacuum robot from getting stuck.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Designed for 16mm diameter tubes, but should also fit slightly larger or smaller tubes as the pieces are 2mm apart. Attached parametric fusion 360 file to adapt to your own needs, just change the inner diameter and standoff.
Requires M3 Screws and threaded inserts.
Raises your rack 15mm, which is high enough for our robot to not drive over it.