YuGiOh Playmat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yu-Gi-Oh Play Mat as "its time to duel"
- Rating
- 3.75 / 5
- Likes
- 155
- Downloads
- 843
- Makes
- 3
- Views
- 6,084
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This play-mat is designed for use with or without approved card sleeves.
The Extra Deck is set to handle 15 Cards
The Main Deck is set to handle 50 Cards
The Graveyard is set to handle 40 Cards
This is designed for use with the classic rules however will look to add in the additional summon zones for single summons at a later date (Since I play classic).
Each STL has the details of how to print.
I printed these using Draft (.3) and 10% infill for the main parts while the Pins and Axel at 50%.
The left and Right Magic Areas have a single hole to link up to required side component i.e. Card Deck or Terrain.
When putting together I used needle nose pliers to hold the pins and a rubber mallet to tap into the holes.
Ensure you together the Card and Magic areas first then put all together .
Note: this was my first design ever and using tinker cad so apologies for any issues and or things that are incorrect from difference in hole inlet length that others may come across.
I designed if for what I needed for anyone wanting to take it and make it there own and can work with the mess i created when I did this the tinker cad link is https://www.tinkercad.com/things/gCOD7R12Gin-copy-of-full-deck?sharecode=ONgSvIPSh_XdvggECw8F49xRHR7vzyPNNkMc6lutr0Y