PentaHextan Puzzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Puzzle
The game consists of box, lid and 20 puzzle pieces. The lid has a small bump on the side that snaps into the box.
The puzzle pieces are used on both sides.
Although there are more than a million different solutions (not counting symmetric solutions), the puzzle is not easy to solve.
3D Printing Tips
The size of the sliding top is crucial. If it's too narrow, the bumps on the top won't snap into place. If it's too wide, the top can usually still be inserted, but it becomes difficult to open.
If the top doesn't fit, it is advisable to adjust its dimensions in the slicer and reprint it. Recommended adjustments are only small increments ranging between approximately 0.2mm and 0.3mm in width (only in width).
Here is a short video explaining this
I printed the puzzle with the following settings:
Material: PLA
Resolution: 0.2mm
Infill: 20%
no supports
no raft, no brim
Other
Further polyform puzzles and background
Liked this model? Check out my other polyform puzzles on Printables