Dübel d6-D8x39 8Stück
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.14 – €1.39 net (excluding VAT)
For file: Dübel d6-D8x39 8Stück / dubel-d6-8x39-8stuck-01_025mm_pla_mini_1h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.54 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dübel d6-D8x39 8Stück
- Rating
- 4.667 / 5
- Likes
- 107
- Downloads
- 720
- Makes
- 2
- Views
- 2,372
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Dübel d6-D8x39 8Stück
Ich empfehle PETG und 100% Füllgrad.
Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten.
Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise Halteproblemen auf dem Bett kommen.
PLA ist sicher auch möglich jedoch können die Teile dann eventuell spröde sein und bei hohen Temperaturen (ca. ab 60° / 80°) besteht “Fließgefahr” das heist Verformung und Verlust der Haltbarkeit der verschraubten Sache.
---------------------------------------------------------------------------------------
Google translates:
Dübel d6-D8x39 8Stück
I recommend PETG and 100% fill level.
The “wing” (anti-twist device) on the side naturally belongs downwards when pressure is applied.
When using ABS, PC or nylon, warping or holding problems on the bed can occur.
PLA is certainly also possible, but the parts can then be brittle and at high temperatures (approx. from 60° / 80°) there is a “danger of flow”, which means deformation and loss of durability of the screwed thing.