1 / 2
Phillips Sonicare Holder - Outlet Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Declutter with this outlet cover with integrated holder for your toothbrush and a few other items
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 77
- Makes
- 0
- Views
- 872
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning: Exposing certain materials to high currents and heat is a fire hazard. This model is intended to be placed on top of an existing outlet cover, not be used as an outlet cover itself to reduce the risk. I'm not an electrician, use at your own risk!
Should be printable without supports for the most part, you may need them for the outlet cover bit. I've included a step file so you can modify as needed
Instructions:
- Turn off power to the outlet from your breaker box
- Place the charger base in the holder
- Feed the wire through the hole in the back of the holder
- Wrap the cord and push it into the hollow area of the holder, leaving enough slack to plug the charger into the wall
- Remove the screws holding the existing outlet cover in place
- Place the holder OVER THE EXISTING outlet cover
- Screw the holder into place
- Turn the power back on