Garbage Truck Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garbage truck toy with rolling wheels and articulated hopper and back gate for playing collecting and dumping garbage!
- Rating
- 4.8 / 5
- Likes
- 258
- Downloads
- 885
- Makes
- 11
- Views
- 5,549
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is very simple to print! Every piece (except for the back gate and part of the bottom of the driver's cab) is designed to be printed without any supports.
There is some assembly but it's not hard. To assemble, slot a washer and wheel onto 4 nails, bend and cut the nails, and slot the nails into the slots in the chassis. Then, use the cover plates to trap the nails/axles inside. Assemble with countersunk wood screws in from the bottom (to attach the bottom cover plates to the chassis and also the driver's cab). To join the hopper/dumper to the chassis, and the back gate to the hopper/dumper, thread wire through the holes in the hinges.
(Cut away the “brim/tabs” on the exhaust pipe print; that's just to increase first layer adhesion.)