Belt Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular, Expandable hanger for Groove Life belts.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 19
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this hanger for Groove Life belts and used command strips to mount them to a cabinet door. It is modular/expandable so it can hold as many belts as you would like.
Assembly Instructions:
| Part | 1 Belt | 2 Belts | 3 Belts | 4 Belts |
|---|---|---|---|---|
| Upper Assembly | ||||
| Frame Ends | 2 | 2 | 2 | 2 |
| Upper Receiver | 1 | 2 | 3 | 4 |
| Single Extension | 1 | 1 | ||
| Double Extension | 1 | 1 | ||
| Lower Assembly | ||||
| Frame Ends | 2 | 2 | 2 | 2 |
| Lower Plate | 1 | 2 | 3 | 4 |
| Single Extension | 1 | 1 | ||
| Double Extension | 1 | 1 | ||
The frame ends and the extensions slide/press together and should stay together without glue.
To assemble, slide the upper receiver(s) or lower plate(s) into the slot of the frame ends and extensions and slide the remaining frame end onto the other end.
Use command strips to mount it to whatever vertical surface you would like.
Optional Parts:
The Upper Receiver and the Lower Plate have a hole for an 8mm x 3mm round magnet. The magnets help to hold the belt more securely to the belt hanger.
The lower assembly is only required to prevent the bottom of the belt from swinging if mounted to a cabinet door (as pictured).
Print Instruction:
To print orient the upper receiver and lower plate so that the hole for the magnets is facing down and to print the frame ends and extensions you will need to orient them with the largest flat sides facing down.
I did not need any support when I printed it.
Print Settings:
Resolution: 0.2mm
Infill: 20%
Infill Type: Gyroid
Perimeters: 3
Supports: No
Material: PETG
How I Designed This:
I used Solid Edge 2021.