Haybot from Scrap Mechanic

This is a model of a Haybot from scrap mechanic. You can adjust the pose of the model to whatever you want. I modeled this in Tinkercad using pictures of Haybots so it might not be exact to the model from the game. This is not an easy print most parts require support and have very small details. The fully assembled Haybot is around 6 inches tall but the height depends on the position you put it in.

Assembly

assembly is quite complicated but you can refer to the fully assembled model and the Tinkercad model here: https://www.tinkercad.com/things/iTE8jxreK5d. glue is required to hold the small details on but you dint have to glue all of the joints in place.

For the hay I lasercut some yellow paper

Non 3d printed materials

-Glue - any glue that sticks to 3d prints works I used ca glue

-Paint

-paper

What to print

LEG

Haybot leg 1 x2

Haybot leg 2 x2

Haybot leg 3 x2

Haybot leg 4 x2

Haybot leg 5 x2

Haybot leg 6 x2

Haybot leg 7 x4

Haybot leg 8 x4

Haybot leg 9 x2

Haybot leg 10 x2

ARM

Haybot arm 1 x1

Haybot arm 2 x1

Haybot arm 3 x1

Haybot arm 4 x4

Haybot arm 5 x1

Haybot arm 6 x1

Haybot arm 7 x1

Haybot arm 8 x1

Haybot arm 9 x1

Haybot arm 10 x1

Haybot arm 11 x1

Haybot arm 12 x1

Haybot arm 13 x1

Haybot arm 14 x1

Haybot arm 15 x1

BODY

Haybot body 1 x1

Haybot body 2 x1

Haybot body 3 x1

Haybot body 4 x1

Haybot body 5 x1

Haybot body 6 x1

NECK

Haybot neck 1 x1

Haybot neck 2 x1

Haybot neck 3 x1

Haybot neck 4 x1

Haybot neck 5 x1

Haybot neck 6 x1

Haybot neck 7 x1

Haybot neck 8 x1

Haybot neck 9 x1

Haybot neck 10 x1

Haybot neck 11 x1

Haybot neck 12 x1

Haybot neck 13 x1

Haybot neck 14 x1

Haybot neck 15 x1

Haybot neck 16 x1

Haybot neck 17 x1

Haybot neck 18 x1

Haybot neck 19 x1

Haybot neck 20 x1

Haybot neck 21 x1

HEAD

Haybot head 1 x1

Haybot head 2 x1

Haybot head 3 x1

Haybot head 4 x1

Haybot head 5 x1

Haybot head 6 x1

Haybot head 7 x1

Haybot head 8 x1

Haybot head 9 x1

Haybot head 10 x1

Haybot head 11 x2

Haybot head 12 x2

Haybot head 13 x4

Print Settings

Printer:

Snapmaker A350

Rafts: 

Doesn't Matter

Supports:

Yes

Infill: 

10%-20%

Filament: polymaker PLA Post-Printing =============

Most parts will require removing support and some cleanup. Assembly is complicated but I am planing on making instructions to help. If you have questions you can ask them in the comments. Some parts might need some sanding to fit well because the tolerances are very tight.