iPad stand honeycomb design.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb designed iPad stand compatible with various number of iPads (iPad2, iPad Air, iPad Pro etc..)
- Rating
- 4.778 / 5
- Likes
- 81
- Downloads
- 1,248
- Makes
- 12
- Views
- 4,642
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple iPad stand.
The original design is by @whoisjako . The original work is wonderful design, but the hook is too small and unstable for my old iPad, so I modeled a new one.
The original design is at this URL.
https://www.printables.com/model/173402-ipad-stand-honeycomb-version
This would fit the newer iPads with narrow bezels in a square shape after the 10th generation or later.
Three kind of models:
Three models are available to match the thickness of the iPad.
- Model thickness 9mm: iPad-stand-60deg-D9-H7-W9_iPad2.stl
- Moldel thickness 7.8mm: iPad-stand-60deg-D9-H7-W7.8_iPad5-9gen.stl
- Model thickness 6.4mm: iPad-stand-60deg-D9-H7-W6.4_Air2-5gen.stl
iPad Compatibility:
- The 9mm thickness model is fits the iPad 2 with a thickness of 8.8mm
- The 7.8mm thickness moldel is fits the iPad 5gen, 6gen, 7gen, 8gen, 9gen, iPadAir, iPad mini2, mini3 with a thickness of 7.5mm
- The 6.4mm thickness model is fits the iPad Air2, Air 3gen, 4gen, 5gen, iPad mini4, mini 5gen, iPad Pro 9.7inch, 10.5inch with a thickness of 6.1mm
And the 6.4mm thickness model may or may not fit iPad mini 6gen with t=6.3mm, iPad Pro 12.9inch 5gen, 6gen with t=6.4mm.
Print Settings:
- Material: PLA, PETG. Maybe other materials would be fine.
- Layer heigth: 0.2mm (We have not tested the height of the other layers.)
- Supports: no supports
Typical amount of filament and printing time:
- It uses only 20.62 g of filament and can be printed in 2h22m for 0.2mm layer height.
Enjoy!