1 / 6
Inspire M3 Folding Utility Knife
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was inspired by the CRKT Provoke series of knives when making this. The M3 is for the 3mm nuts and screws used :)
- Rating
- 4.667 / 5
- Likes
- 312
- Downloads
- 986
- Makes
- 10
- Views
- 8,364
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
WARNING: While this does function as a knife, it is not recommended for use. Utility blades are very sharp and this design does not exhibit a locking mechanism, tight tolerances, or suitable materials to warrant safe use.
I was inspired by the CRKT Provoke series of knives and their unique folding mechanism. Thus, I decided to create my own version in utility knife form.
- Print Settings
- PLA
- 0.4mm nozzle
- 0.2mm layer height
- 3 perimeters
- 20% infill
- no supports
- Additional Hardware
- 1*M3x6 pan head screw
- 2*M3x8 pan head screws
- 2*M3x12 pan head screws
- 1*M3 nut
- 4*M3 nylon lock nuts
- 4*M3 washers (for between the arms and attached parts)
- utility knife blade