Filament rewind box kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This makes it Easier to rewind the filament. it works :)
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 31
- Makes
- 0
- Views
- 987
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Do not open the filament box to reinsert the filament.
this set up I have made a gearbox on the side so you can rewind the filament again without removing the lid. have linked the rollers together with O-rings so they work together. see pictures
I have used PETG and PLA
20%fil
Youtube Link:
Filament box one 32 39x39x26
- [ ] 1pc M8 Threaded rod 1 meter (needs 2X295mm)
- [ ] 4 pcs M8 Lock nuts
- [ ] 1pc M6 Threaded rod 1 meter (needs 360mm)
- [ ] 4 pcs M6 nuts
- [ ] 3 pcs M6 Lock Muters (Nylon)
- [ ] 4 pcs M6 Flange nut
- [ ] Ball bearing 608ZZ 12 pcs
- [ ] Double-sided tape (Strong)
- [ ] Necessary drills (2mm largest 16mm)
- [ ] 3 pcs O-Ring 100x1.5 to 3mm (IDxdia)
- [ ] 1pc O-Ring 3/8x9/16x3/32 (IDxODxT) for the Gear Box slider
- [ ] 1 pc Box one 32 (39x39x26cm) art no. 0030