5 points first layer calibration
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.46 – €0.56 net (excluding VAT)
For file: 5_Places_FirstLayerCalibration-FirstLayer_0.2mm_PLA_SV06_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.51 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 37.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a remix of the first layer calibration model by yahbluez to cover also the 4 corners of the plates
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 494
- Makes
- 0
- Views
- 2,031
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
What is it ?
This is just the model from yahbluez scaled down and copied 4 times in the corners of the plate. It allows to find the z-offset for 5 different parts of the plate, allowing you to check your bed levelling, bed flatness and if your ABL is working well.
How to use it ?
The same way than the original model, but since each part is smaller you have to be more attentive.
Each part must be printed independently and filled horizontaly instead of diagonally (which the usual default).
Change the Z offset of each step of the part, and do not forget to use the same values for each part of the model.
Print in a lighter color to analyse better the result, but using a light source like your cell phone light is quite helpful also
I provide the gcode for a sovol SV06 as well as the STL and .3mf models. The print took me 45mn
You'll find more info on the original model page
How to slice it ?
Change the default angle for the slicer to 0°
On Prusaslicer it's the option:
Print settings → infill → Fill Angle = 0
I didn't need to select the option complete individual objects to print each part independently, but your mileage may vary