Robust RØDE NT-USB Microphone Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.36 – €1.66 net (excluding VAT)
For file: RODE_NT_USB_MOUNT_0.1mm_PETG_MK3S_1h55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.51 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.92 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A remix of the original RODE Microphone NT-USB Upgrade Mount optimized for printability
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 278
- Makes
- 1
- Views
- 1,392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks.
Nonetheless, the original design is not usable for FDM due to the tight fit (opening and screw holes too small) and the fact that the spring had been replaced by an extruded ring preventing assembly. Therefore, I modified the model with a notch to house the factory spring and increased the hole diameters.
Print with 100% infill and/or sufficient perimeters. Supports for the radius on the holder are recommended to help with the overhang. Presliced models with optimized outer contours and 0.1mm layer size for optimal stability included for PETG and ASA.