Gridfinity compatible Socket organizers for Tecpo Socket set

When I wanted to transfer my current toolbox from tecpo with a lot of SAE sockets and wrenches I found the gridfinity system. Because I did not find suitable boxes which are fast and easy to print with a minimum amount of material I designed my own. 
Specially optimized for this imperial Tecpo socket toolbox. 

All boxes fit onto Gridfinity baseplates. 

Key Features

• Filament and print time savings: This holders are no boxes but only shells
• Gridfinity compatible: Designed from official Gridfinity specifications
• No Support needed: Chamfers have 45 degrees
• Easy to print: No letters on top or first layer (but space for labels)

Print Instructions

I designed them to be printed upside down so the upper side of each box is touching the buildplate. In this orientation I designed all angles to be printable without support. 

I printed them with 

• PETG
• 0.6mm nozzle
• 0.3mm first layer height
• 0.4mm layer height
• 10% gyroid infill
• 2 perimeters
• 3 bottom, 3 top layers
• No supports
• Top of boxes on print surface

Storage Options

Gridfinity Short Nuts Box:
SAE Sockets 1/4": 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"
SAE Sockets 3/8"1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16,1“

Gridfinity Long Nuts Box:
SAE Sockets long 1/4": 1/4, 5/16, 3/8, 7/16, 1/2“
SAE Sockets long 3/8": 9/16, 5/8, 11/16, 3/4“

Gridfinity Large Bits Box:
Place for 10x 8mm bits.

Gridfinity Small Bits Box: 
Place for 19x 1/4" bits. 

Gridfinity Wrenches Box:
Stores a 1/4" and a 3/8" wrench, an 3/8" to 1/4" adapter. 

Gridfinity Open End Wrenches:
Open End Wrenches of size 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4“

Gridfinity Spark Plug Nuts:
Nuts for 5/8, 3/4, 13/16“