Pig Coin
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.10 net (excluding VAT)
For file: PigCoin - CoinColor_0.2mm_PLA_MK3S_6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made this pig coin to go with my piggy bank print: https://www.prusaprinters.org/prints/37656-pig-…
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 806
- Makes
- 18
- Views
- 2,048
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
Update : Aug. 20, 2022 : Added gcode and 3mf files for multi-color printing with filament switching.
I made this pig coin to go with my piggy bank print:
https://www.prusaprinters.org/prints/37656-pig-version-3-piggybank2
Print a bunch and become rich!
The OnShape 3D CAD file for this is here:
Print instructions
Print in PLA using the 3mf files provided; otherwise :
- 0% infill
- no supports required
Using a brim will increase your success rate, although the coins have a nice edge when printed with no brim. Careful smooth print bed preparation with a glue stick will make no-brim printing more successful. It also helps to make sure the Z height setting is fine tuned.
There are 3mf file provided for two sizes - the base size (25mm diameter), and scaled up 120% (about the largest that will fit the bank coin slot).
Update : Aug. 20, 2022 : Added gcode and 3mf files for multi-color printing with filament switching. 3mf and gcode files are provided for coins in 100% and 140% size. These prints require god bed adhesion for the first layer, so a bit of glue stick on the bed plate is recommended.
PLEASE NOTE : Small objects can be a choking hazard for small children. The appropriate size to mitigate this danger is 1.25" (32mm) or larger.