1 / 2
HDD Tray for 8 3,5" Drives with low filament consumption — image 1
1 / 2

HDD Tray for 8 3,5" Drives with low filament consumption

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple HDD Tray for 8 3,5" Drives with low filament consumption

Rating
0 / 5
Likes
7
Downloads
84
Makes
0
Views
451
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Simple HDD Tray for 8 Drives without wasted filament.
I made it for 0.5 - 0.8er nozzle sizes, but you can print it with smaller ones too.

Inner sizes are 120,1mm x 26,1mm. Thats the specs for 3.5" Drives. If your printer does not print accurate or your filament shrink a lil bit, print it with 101-103% on the X/Y!
For me, with 100%, the drives fits absolute perfect with zero gaps.
But that will only work with a perfect print.

Please keep that in mind and dont blame me, if your drives does not fit. :-)

I slice the print in the picture with S3D and use the zigzag gap fill for the perimeter. Thats needs alot of time, but the structure gets very strong. If you want the print faster, use the thin wall single extrusion gap fill (default on PrusaSlicer btw).
Printed with a 0.5 nozzle and 0.56 EW and 2 types of PETG.