Drill mode remix for Spool Winder - parametric (Fusion360 file)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With one single part to replace, you can use your standard 6mm hex drill bit to rewind it automatically (drill winder)
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 150
- Makes
- 1
- Views
- 1,206
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With one single part to replace, you can use your standard 6mm hex drill bit to rewind it automatically (drill winder).
You can use this part and add a 6mm hex drill bit to rewind it with your drill. If you already have the spool winder, this is the part that makes your life much easier.
Print instructions
- no support
- whatever nozzle you have
- external perimeter first (optional but recommended)
- Variable layer height (I printed it with 0.2 - 0.48mm layer height in <20min)
- 3 perimeters, 25% infill
- Material: I used PETG (for long term use), this will probably work with any material for short term use
Dimensions
- 6 mm = Hex-drill bit 6mm size
- T0.3mm = Tolerance is 0.3mm inside for the drill bit
- hex = it has 6 edges (hexagon)
I made it parametric. You can just change the values to get a part that fits your spool winder and printer tolerance
| Parameter | Function (Standard value) |
| radius_big | outer radius (23mm) |
| Polygon_size | Size of the polygon (here hex 6mm +0.3mm tolerance = 6.3mm) |
| Radius_big_small_Distance | Distance between the big part (outer part) and the radius from the inner part. (5.5 |
| inner_radius_height_to_cutout | Distance from the smaller part to the cut-out section (5mm) |
| inner_radius_part_length | Part length of the smaller (radius) part. This can be changed if it is not long enough to fit into the spool winder (21mm) |
| cutout_length | How much should the cutout go into the part (4mm) |
| Polygon_edges_Nummer | If you want to change the number of edges. Standard 6 = hex drill bit |
You probably only need to change the “polygon_size” parameter if your drill bit is lose or won't fit.
Other sizes
- If you need other sizes, please let me know what parameter needs to be adjusted for you, then I will upload it. Or just remix it (if you have Fusion360 :)
Remix
Feel free to remix it.