Emax Babyhawk HD Antenna Holder

This is a remix of Jubalthegr8's Caddx Vista antenna mount for the BabyHawk II HD. I added an R9 antenna holder on the back.

Print in the orientation you see in the image above with supports turned on. The R9 antenna comes down at an angle to align the antennas with the base of the arm on the frame.

I used TPU with 10% infill to keep it light weight.

Here is the Tinkercad file if you want to customize: https://www.tinkercad.com/things/0ljAijJD7SD

I suggest disconnecting the antenna wire from the vista unit, then sliding the wire through the print and reattaching to the vista. Here are some visuals on how to disconnect the wire. https://oscarliang.com/caddx-vista-vtx/

Also note that the stock frame posts are still used. You slide them through the opening in the print and reassemble the frame the same way it was taken apart.

Let me know if you have questions or need any advice on assembly.

Print Settings

Printer Brand:

Raise3D

Printer:

Rafts:

No

Supports:

Resolution:

100

Infill:

Filament: Sainsmart TPU Black

Notes:

Category: R/C Vehicles