Adjustable shower head holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.29 – €4.03 net (excluding VAT)
For file: shower-head-holder_02mm_pla_mk3s_3h53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.66 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 3.89 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Something I designed to be able to have a shower without holding the head.
- Rating
- 4.667 / 5
- Likes
- 71
- Downloads
- 705
- Makes
- 8
- Views
- 2,847
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Something I designed to be able to have a shower without holding the head.
The two main parts are joined by a Hirth coupling (teethed discs) that are locked together with a printed screw.
Designed to be glued to the wall.
Print instructions
Print with 0.2mm max, as the screw has a fairly fine thread.
Print everything once. Discs friction fit into the slots. (Might need a tap with a wooden mallet/hammer)
Caution: The design uses non-tolerance cuts for tight fits. Please make sure your printer is properly calibrated