Adaptor for 1 3/4 inch wand handle to 1 7/8 inch shop vacuum hose.-FreeCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adaptor to connect an old wand handle from a 1 3/4 inch hose to a 1 7/8 inch hose.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 96
- Makes
- 0
- Views
- 816
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v2.0
I wanted to use an old central vacuum wand and accessories on my shop vacuum, but the hoses are different sizes. I looked at several parametric designs but found them somewhat confusing so I decided to design my own. The wand handle has female threads and connects to a 1 ¾ inch hose. The shop vacuum hose is 1 7/8 inches and can have a female threaded unit screwed onto it. I created the provided FreeCAD file to get the 3mf file for PrusaSlicer. It took a lot of trial and error to get the fit just right.
To get the threads to print without supports, I slowed bridges to 15mm/s, otherwise, just the standard 0.3mm profile with 3 perimeters.