1 / 4
Adjustable legs for RatRig V-Core
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Height adjustable legs to level your printer on uneven floor.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Height adjustable legs for Ratrig V-core 3 printer.
Allows to level the printerframe if the flooring is uneven.
Hardware:
- 4x adjustable legs M10 x 40 mm (50 mm might also be ok)
- 8x M10 nut
- 4x M5 x 16 mm socket head cap screw
- 4x M5 x 15 mm washer
- 8x M6 x 16 mm socket head cap screw
- 8x M6 washer
- 8x M6 T-nut for 3030 Al. profile
Printed in ASA with 4 perimeter 5 top and bottom layers.
Layerheight 0.2 and infill 23%.
Rubber feets from the corners needs to be removed and this hole is used with M5x16 + washer to secure the plate to the corner.
Additional fastening can be made into the extrusion with M6x16 + T-nuts.