1 / 2
Micro Swiss Extruder PFTE Coupler Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an Adapter for the Micro Swiss Extruder, to be able to use a PTFE Coupler instead of the compression Nut.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My Micro Swiss Extruder was skipping from time to time and I could narrow it down to the compression nut, to avoid user error due to overtightening, I created this adapter, so I can use a PTFE Coupler instead.
There is no Thread inside the Adapter, it needs to be cut with a tap. M8 with 1.0mm pitch on the smaller diameter and M10 with 1.25mm on the bigger diameter.
I chose the M10 Coupler as the PTFE Tube will go all the way through and into the Extruder.