1 / 4
Boba Fett's Jetpack for Lucky 13!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Boba Fetts Jetpack with a working rocket launcher!
- Rating
- 0 / 5
- Likes
- 101
- Downloads
- 149
- Makes
- 1
- Views
- 1,750
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
This is Boba Fetts jetpack with a working rocket launcher like in the movie!
It works for the lucky 13 by soozafone as well as the scout 22.
Print in only 1 hour and 10 minutes!
If you like it - like it!
Needed items:
Pen spring
Glue
Print settings:
0.15mm layer hight
PLA
10 or more infill
Brim on rocket
Support on both sides of the jetpack
Assembly instructions:
- Print all files
- Put the spring into one half of the jet pack and glue it to the bottom of the tube to make sure it does not fly away when shooting.
- Glue both sides of the jetpack together.
- Split the chest and the lower body
- Place the jetpacks waste strap on to the ball joint of the lower body
- Connect the upper body with the lower body again so that now the jetpack is attached to the lucky 13
- Load the rocket by pressing it against the spring while pressing the peg into position.
- Pull out the peg to fire!