JumpingJeep Bobblehead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Did this for my brother. He likes jeeps.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
My Brother likes his Jeeps, so I decided to make a jeep Boblehead. While I was at it, I though, why not make a bobblehead of him, bobbling on his jeep as it bobbles. And here it is.
The Jeep is my own design, but I did take the body from the Joel bobblehead. I scaled it down a bit, but all seems to work fine (though I did have to sand the ends of the smaller spring to get them to fit in).
In this model, I made the wheels loose, so you could take it off the base and roll it around, so I only glued the large spring to the base. The slot at the bottom of the jeep seemed to hold well without gluing.
I broke the jeep into 2 parts, with the bottom half printing upside down. If you can print better than I can, you can go with the jeepfull stl file.