Buffer Stop Insert - Brio/IKEA Wooden Train Track
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.69 net (excluding VAT)
For file: PETG version with 0.15mm layer height / briostopinsert_015mm_petg_mini_47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 46.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Buffer stop on any track piece female connector
- Rating
- 5 / 5
- Likes
- 104
- Downloads
- 458
- Makes
- 13
- Views
- 1,281
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with the stop pointed up, no support, 15% infill. I did 1mm walls and top/bottom layers with a 0.4mm nozzle at 0.2mm layer height.